CODACE Electronic DIY Cabinet Lock with NFC RFID for Hidden Double Door Cabinet

【1 Key For Multiple Locks & Android IOS NFC Unlock】Program the key into several locks as you want and test it before installation. You can use 1 key (RFID card/fob) to unlock several cabinet locks without touch. (Frequency 13.56mhz)

【NFC Setup】For iOS, you need to hold an existing transit card or bank card, the card needs to be configured successfully, and add this card to iPhone Wallet. For Android, copy your RFID key to your smartphone's wallet via NFC function.

Pre-Installation Preparation(IOS)

1. X1 existing transportation card or bank card
2. X1 iPhone with wallet function

3. X1 electronic lock with AAA battery Add an existing transportation card or bank card

4. Install the battery, then use the included screwdriver to insert it into the hole of the reset button (it can be reset when you hear the sound of Di).

5. Hold the traffic card or bank card near the induction area of the lock until you hear a short sound (successful configuration).

6. Open your iPhone wallet and add this existing card scan to your phone Input NFC Signal

7. Re-open the wallet and click Use Card.

8. After the electronic lock is unlocked, enter the mobile phone card information and confirm the input with two beeps.

Package includes:

1 x Drawer Lock 1 x Latch 1 x Slide Latch Lock 1x USB Cable 1 x RFID Tag/Fob 2 x RFID Card 1 x Screw set 1 x Location Icon

CODACE Smart RFID Lock for Cabinet Drawer

Verification Method: Mifare /IC Card /13.56MHz Power Supply: 4AAA Batteries (Not Included!!!) or USB powered Low battery alarm: Voltage less than 10% Pin Length: 16mm Bolt Plate Dimensions: (LWH) 702416mm Lock Dimensions: (LWH) 7575*30mm Holding force: More than 170kg Installation way: Side or top Surface mounting Emergency power supply port: USB Weight: 0.27kg Reading Distance up to 50mm Installed vertically or horizontally One card open multiple locks (video display) Strong locking for double door cabinet

QA about Lock:

What is the RFID lock made of? ——Stainless steel latch and ABS plastic lock body, durable and anti-corrosion

What specific RFID cards does this locker require? ——M1 13.56MHz Card

What is the wire cable sticking out the box used for? ——The cable is an external power supply for an emergency. When installing the cabinet lock, you could leave the cable outside for an emergency to get power (the other way is powered by 4pcs AAA batteries)

QA about Application:

Will this electronic drawer lock serve for door? ——Please be noted: this RFID lock is not for the door, but ONLY used for a wooden cabinet door/drawer/lockers/pantry/cupboard, etc

Where can I install this RFID lock? ——This is a mini intelligent cabinet lock, which can be installed in the lockers or drawers for home, gym, supermarket, school, etc

QA about Operation:

How can I install this cabinet lock RFID? ——This cabinet lock includes the screws, you just use a screwdriver to secure the lock in the appropriate place of the cabinet. No Drilling. Easy to install.

How to do all the locks with the same key? ——Please use the management card to sense the lock and then quickly sense the key. Use the same way to set another lock.

Cases You May Have:

How to open my drawer if the RFID hidden drawer lock has been installed to use for a month then it suddenly stopped working? ——Attention: Do not swipe the management card 9 times continuously, it will turn off the low-power unlock function

Can't get them to work only on 2.5 mini jack/USB with 5v. Only battery option works. Am I doing something wrong? ——You can use a two-pole 2.5 jack, the length is 11.55mm. If you can't get this jack, you can cut off the cable and connect directly without a jack. But please make sure connect cathode & anode correctly. And when you use USB to power, please take out batteries.

What happens if the batteries go dead while it is locked? ——It will unlock automatically shortly before the batteries go dead. And there will be a warning beep to remind you while it is in lower power status.

Can use only a power adapter and no batteries? ——Yes, it's not a problem, but it should be 5VDC. If you want 5V DC instead of 4xAAA batteries, the lock may have a lower power alert. You can't input 4xAAA batteries and connect 5V DC for a long time, the lock will break.

RFID Electronic Lock

10 Pcs RFID cards-13.56Mhz Smart Fingerprint Lock

Add to Cart See Details See Details

Customer Reviews 4.1 out of 5 stars 772 4.6 out of 5 stars 3 3.9 out of 5 stars 104

Price $19.98 $19.98 — —

Need To Assemble ✓ ✓

Battery Powered ✓ ✓

Cabinet/Cupboard/Drawer ✓ ✓

【1 Key For Multiple Locks & Android IOS NFC Unlock】Program the key into several locks as you want and test it before installation. You can use 1 key (RFID card/fob) to unlock several cabinet locks without touch. (Frequency 13.56mhz)

【NFC Setup】For iOS, you need to hold an existing transit card or bank card, the card needs to be configured successfully, and add this card to iPhone Wallet. For Android, copy your RFID key to your smartphone's wallet via NFC function.

product information: